How do you Buy and Sell Gold Silver and Platinum? This article will SHOW you how to buy and sell by gram and pennyweights. Rock provides you with calculator training formulas and facts that will make you a pro in a few hours. Take a look-see!
BUYING & SELLING
GOLD - SILVER - PLATINUM
GRAM Vs DWT
Convert DWT into Grams
21 DWT X 1.5 = 31.5 GRAMS
I
A mixture of 7 parts platinum with 3 parts iridium. This gives to platinum the hardness
of steel,
which can be still further increased by taking 4 parts of iridium.
II
An alloy of 9 parts platinum and 1 part iridium is used by the French in the
manufacture of measuring instruments of great resisting power.
Compounds of copper, nickel, cadmium, and tungsten are also used in the construction of
parts of watches; the latter acquire considerable hardness without becoming magnetic or
rusting like steel.
III
For this purpose a compound of
62.75 parts platinum, 18 parts copper, 1.25 parts cadmium, and 18 parts nickel is much
recommended.
IV. — Very ductile platinum-copper alloys
have also been made, e. g., the so-called Cooper gold, consisting of 3 parts platinum and
13 parts copper, which is almost equal to 18-carat gold in regard to color, finish, and
ductility. If 4 per cent of platinum is taken, these latter alloys acquire a rose-red
color, while a golden-yellow color can be produced by further adding from 1 to 2 per cent
(in all 5 to 6 per cent) of platinum. The last-named alloy is extensively used for
ornaments, likewise alloy V.
V. —Ten parts platinum, 60 parts nickel, and 220 parts brass,
or 2 parts platinum, 1 part nickel and silver respectively, 2 parts brass, and 5 parts
copper; this also gives a golden-yellow color.
VI
For table utensils a favorite alloy is composed of 1 part platinum, 100 parts nickel,
and 10 parts tin. Articles made of the latter alloy are impervious to atmospheric action
and keep their polish for a long time. Pure white platinum alloys have for some time been
used in dental work, and they have also proved serviceable for jewelry.
VII
A mixture of 30 parts platinum, 10 parts gold, and 3 parts silver, or 7 parts platinum,
2 parts gold, and 3 parts silver.
VIII
For enameled articles: Platinum, 35 parts; silver, 65 parts. First fuse the silver,
then add the platinum in the spongy form. A good solder for this is : platinum 80 parts,
copper 20 parts.
IX
For pens: Platinum, 4 parts; silver, 3 parts; copper, 1 part.>