SiteMap

  SiteMap – Education & Training    

Best 2015?

For A Taste Of Our Free Photo Gallery Site Wide Above 450000 Photos Over The Last 9 Years Click Here: For A Taste Of Free At No Cost Vintage-Time-Remade-In-America-Training-PDF’S–Click-Below Training-Restoration PDF’s 811,105 views   CLICK BELOW FOR THE MECHANICS OF THE WATCH [fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/Play-all.mp4″ width=”800″ height=”450″] MORE STUFF COMING SOON [auction-nudge tool=”listings”] GOLDSMITHWORKS NEW YOU-TUBE[…]

Vintage Watch Hands

  ROCK CULLED THESE FROM THE INTERNET BOOKS & HANDS ON RESTORATIONS AND SUPPLIERS TO DEMONSTRATE THE DIVERSITY OF STYLES, SHAPES AND COLORS OF VINTAGE WATCH HANDS Alpha Arrow Broad Arrow   Baton Tapered) Breguet (Antique Roman) CathedraL Cubist Dauphine Lance (Hollow Fancy) Leaf (Willow) Lozenge Louis XVI Paddle Pear Pencil Plongeur Spade Squelette Skeleton[…]

History Seikosha Seiko Hattori 1

AT BOTTOM IS A LINK TO THE FULL SEIKO CREATED PDFNOTE SOME ITEMS ARE OFF AT BOTTOM IS A LINK TO THE FULL SEIKO CREATED PDF NOTE SOME ITEMS ARE OFF, NOT LISTED OR AGE IS OFF. SUCH AS THE 1950 TANK STYLE IT WAS MADE 1920’S TO 1945 FOR ACTUAL GREAT PICS BY GSW[…]

2 Years In Trunk Water Salt Restored By Rock 6105 Seiko Dive

6105 6105-8119 02-08-2012 HOW DID THIS BEAUTY GET ITS BEAUTY TREATMENT TYLER’ WATCH ARRIVED WITH MINTY DIAL – CASE SCRATCHING AND WRONG HANDS. TYLER SUPPLIED COATED CRYSTAL AND HANDS. THE MOVEMENT SEEMED TO HAVE BEEN REPLACED DUE TO THE FACT THE DAMAGE TO ROTOR FAR EXCEEDED THE CONDITION OF WATCH. THERE WAS NO WAY IT[…]

Watch Glossery

Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z (Features)AAnnual calendar A watch displaying the day, date, month, and 24 hours that adjusts automatically for short and long months. An annual calendar requires only a single manual[…]

Full Page Post Sitemap

SiteMap – Education & TrainingFull Page Post Sitemap

Picasa 45K in Pics

“” [auction-nudge tool=”listings”]

Gallery Top Pic 2009-2013

[auction-nudge tool=”listings”]

thumb

WWII-UNIVERSAL-RUSTED-MOVEMENT-RESTORE

   SORRY TEXT HAS TO BE ENTERED UNIVERSAL RESTORE WWII

6 INTRO ENERGY CONTROL WHEELS ESCAPEMENT

INTRO ENERGY CONTROL WHEELS ESCAPEMENT CLOCK TIME [fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/Play all.flv” width=”800″ height=”450″]

1 INTRODUCTION

[fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/Introduction.flv” width=”800″ height=”450″] Introduction      

Restorations By GSW Video

[fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/A-14-RESTORATIONS.mp4″ width=”800″ height=”450″]gsw video restoration

12 Watch Movement Operating Steps mp4

[fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/Play-all.mp4″ width=”800″ height=”450″]

thumb

150K IMGS

“”

APPRAISAL LEARN EXP

THE GSW GOLDSMITHWORKS APPRAISAL IS ONE OF THE MOST IMPORTANT DOCUMENTS YOU CAN POSSESS AS TO YOUR VINTAGE WATCH. NOT ONLY IS THE WATCH DETAILED AS WELL AS OUR OFFERS, YOU MAY UTILIZE IN INSURING YOUR VINTAGE WATCH. IT IS A DETAILED DOCUMENT IN CASE OF THEFT OR REPLACEMENT. IT DEMONSTRATS IT WAS WAS RECENTLY[…]

TRADEMARKS ET EL

Turning Your Old Jewelry Into Something New ™VINTAGE & MILITARY WATCHESVintage Time Re-Made In America ™ WE SUPPORT TIMEFRAUD.COM ABOUT USGoldSmithWorks™ 2005 ROCK SCARFONE ALL RIGHTS RESERVED,provides this page to educate users about our company, our services and our trade & service marks and actions that infringe those trade/service marks and other intellectual property rights.COMPANY:VEroTRADE GROUPS:SERVICE[…]

thumb

Time-ind VID

[fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2015/08/Time-indicator.mp4″ width=”800″ height=”450″]    

German_Watches

GERMAN-MILITARY-WATCHES.pdf   GERMAN WWII ARMY SWEEP SECONDS INTELLIGENCE WATCH **************************************** BELOW IS PHOTO OF GENUINE DI-H ABOVE WAS POSTED ONLINE AS IS *************************************** I HAVE HAD ONLY TWO OF THESE IN 20 YEARS THE GERMAN MILITARY PROPERTY MARK”DI SERIAL H” WAS UTILIZED FOR THE ARMY INTELLIGENCE SERVICE MORE GERMAN WWII WATCH HISTORY BELOW ALL WATCHES[…]

German_Sub_Pilot_Army_KM_WWII_Watches

GERMAN-MILITARY-WATCHES.pdf   GERMAN WWII ARMY SWEEP SECONDS INTELLIGENCE WATCH **************************************** BELOW IS PHOTO OF GENUINE DI-H ABOVE WAS POSTED ONLINE AS IS *************************************** I HAVE HAD ONLY TWO OF THESE IN 20 YEARS THE GERMAN MILITARY PROPERTY MARK”DI SERIAL H” WAS UTILIZED FOR THE ARMY INTELLIGENCE SERVICE MORE GERMAN WWII WATCH HISTORY BELOW ALL WATCHES[…]

thumb

ADJ VIN WTCH

IF YOU WERE ME, ABSOLUTELY YES & NO.  AS TO TIMING IT, THE SAME. IT TAKES TRAINING, BUT MORE PERSEVERENCE… A WEEK OR TWO. POSSIBLY A FEW 18 HOURS DAYS.. THIS BECOMES YOUR ” EXPERIENCE ” IN BALANCING… FROM THE DRAG OF THE HANDS TO THE USE OF TIMING WASHERS.. LITTLE BRASS AND/OR COPPER WASHERS[…]

WWI-II IED!

GERMAN WATCHES MARKINGS PROPERTY MARKS HTML [NEW WINDOW] FOR THE HITLER LIMITED TO 7 PIECES ALPINA LUFTWAFFE PRESENTATION HACKING CENTER SWEEPS POCKET WATCH CLICK HERE [NEW WINDOW] IIIIIIIII JUSTIN ANCRE ONE OF THE LARGEST WRIST WATCHES EVER MADE IN IT’S DAY PRODUCTION BETWEEN 1940 1945 MM W/O CROWN ALL STEEL CASE EXCEPTIONAL CONDITION FULL RESTORE[…]

MILITARY ISSUE OR NOT

     GSW PO BOX 2301 SUWANEE, GA, USA 30024 +1.770.831.1257  – 1.800.438.6894     ETSY FREE GLOBAL SHIPPING DISCOUNTED WITH TIME IN HAND   GSW/GSWW OUR ONCE PRIVATE SITE   ARE ALL “MILITARY WATCHES” GOV ISSUED?     WHAT DO THESE SENTENCES HAVE IN COMMON GRUEN SOLD MORE MILITARY WATCHES THAN THE MILITARY SUPPLIED[…]

thumb

BABE HITS ONE OUT OF PARK!

?????? RECORD SETTING PROFITS  ????? WHO SAYS THE BABE CAN’T HIT ONE OUT OF THE PARKANY MORE BABE RUTH MEMORABILIA WATCHNETS 90 X COST IN PROFIT

111-ALL-VIDEO

        CLICK HERE FOR ADDITIONAL WATCH TRAINING VIDEO

How A Fine Watch Works

[fvplayer src=”http://goldsmithtraining.com/wp-content/uploads/2016/01/How_A_Watch_Works.mp4″ width=”420″ height=”340″ splash=”http://goldsmithtraining.com/wp-content/uploads/2015/08/WATCH-CANDY.jpg”]

ADJ VIN WTCH

IF YOU WERE ME, ABSOLUTELY YES & NO.  AS TO TIMING IT, THE SAME. IT TAKES TRAINING, BUT MORE PERSEVERENCE…

A WEEK OR TWO. POSSIBLY A FEW 18 HOURS DAYS..

THIS BECOMES YOUR ” EXPERIENCE ” IN BALANCING…

FROM THE DRAG OF THE HANDS TO THE USE OF TIMING WASHERS.. LITTLE BRASS AND/OR COPPER WASHERS PLACED BETWEEN THE HOUR WHEEL A DIAL.. [OVER THE CENTER CANNON  PINION] .. ALSO KNOWING THE MAIN SPRING BARREL AND MAIN SPRING AND HOW TO UTILIZE HEAVIER OR LIGHTER SPRINGS TO COMPENSAYE FOR WEAR...

NOT ALL PARTS CAN BE CHANGED OUT DO TO COSTS, AVAILABILITY, AND OTHER CAUSES AND REASONS...

BUT THE MAIN FACT IS THAT IT CAN AND IS ACCOMPLISHED EVERY DAY………

BOTTOM LINE TO THE EXPERT THAT IS TIMING A VINTAGE TIME PIECE WITH 40 TO 80 YEARS OF MILEAGE BECOMES MORE THAN THE TIMING MACHINE;;

THE TIMING UNIT MEASURES THE BEAT OF A MOVEMENT AND OTHER IMPORTANT FACTORS. THE IDEA IS TO CREATE THE OPTIMUM SWING OF THE BALANCE IN REFERENCE TO THE FULL UNWINDING OF THE MAIN SPRING. FROM FULL WIND TO NEAR UNWIND.

THE TWO SPRINGS ARE THE MAIN AND THE HAIR SPRING..

GO: HTTP://GOLDSMITHTRAINING.COM AND CLICK THE MOVIE BUTTON FRONT PAGE
TO VIEW A QUICK AWESOME MOVIE TO SEE HOW A MOVEMENTS TRAIN OPERATES 
FROM THE MAIN THROUGH TO THE BALANCE AND HOW THE MAGIC PRODUCES TIME MEASUREMENT

ONE BECOMES AN EXPERT  RADIOGRAPHER; A GENIE WITH A LANTERN.;

WHILE A FANCY PRINT OUT FROM AN EXPENSIBVE TIMING MACHINE CAN SURELY  SHOW WHAT IS WHAT.. THE BEST MEANS OF TIMING A VINTAGE TIMEPIECE REMAINS THE OLD FASHIONED WAY USING SIMPLE TOOLS THAT DO NOT COST 700.00 TO 5000.00

COMMON TOOLS AND EQUIPMENT LIKE A:

A STANDARD DIGITAL TIMING CLOCK: LIKE THAT ON A WALL OVEN W/TIMER

A STANDARD QUARTZ WATCH OR CLOCK: JUST A NORMAL CHEAP QUARTZ WATCH

A STANDARD FRIDGE [NY SLANG]: CHILLING THE TIME FOR 5 TO 10 MINUTES

A VERY GOOD TWEEZERS & TWO SCREW DRIVERS. WILL PROVIDE SIZE AND MODEL

THOUGH PARTS WEAR OVER TIME. IT IS THE WHEELS RUBBING AGAINST EACH OTHER FOR 5, 10, 15, 39, 40, 59 YEARS THAT CAUSE NATURAL WEAR.

NEVER EVER TURN/SET VINTAGE WATCHES COUNTER CLOCK WISE IOF YOU DO NOT HAVE TO DO SO. PERIOD. SIMPLY TRY NOT TO DO SO.

GETTING BACK TO WEAR,  THE FIRST TIME PIECES EVER MADE WITH METALS USED ONE TYPE OF METAL. CLOCKS WOULD BE BUILT WITH, SAY. BRASS, COPPER, TIN, AND GEARS MADE WITH THE SAME METAL WERE USED IN MOST BUILDS UNTIL IT WAS DISCOVERED THAT WHEN USED THIS WAY, THE GEARS/WHEELS MADE OF SIMILAR METALS WORE TWICE AS FAST AS IF AN ALLOY OF BRASS WAS USED AGAINTS AN ALLOW OF WHITE METALS.

IRON/STEEL WITH COPPER/BRASS WOULD LAST TWICE AS LONG AS IF THE BRASS/COPPER WITH BRASS/COPPER OR IRON/WHITE METAL WITH IRON/WHITE METALS. THE MACHINIST WHO CAME UP WITH THIS BRIGHT IDEA USED A WHITE METAL ALLOY AGAINST A BRASS METAL ALLOY AND NOTED THAT THE WHEELS LASTED LONGER.

HENCE, A WHITE ALLOY METAL WHEEL AGAINST A BRASS ALLOY WHEEL IN BOTH CLOCKS AND WRIST WATCHES AND TIMERS ARE FACT TODAY. YET THERE REMAINS WEAR, EVEN IF NOT SO WORN AS TO REQUIRE FULL REPLACEMENT. THIS WEAR ADDS TO DRAG AND TO A CHANGE IN THE TRAIN OF THE SMOOTH OPERATION OF THE TIME PIECE.

KNOWING THAT THIS OPPOSITE OR OPPOSING METALS DOES NOT STOP WEAR COMPLETELY, RESTORATION MUST USE MANY ADJUSTMENTS AS WELL AS REPLACING THOSE WHEELS AND PINIONS THAT ARE EXCESSIVELY WORN.

YOU CAN CLEAN AND LUBRICATE A TIME PIECE. BUT THE ONLY TRUE ADJUSTMENTS TO A WATCH ARE THE:

BALANCE OSCILLATION BACK AND FORTH.
THE TILT OF THE BALANCE
THE ADJUSTMENT OF THE HAIR SPRING
THE USE OF STRONGER OR WEAKER MAIN SPRINGS
AND THE ADJUSTMENT OF WASHERS, SPACERS, HANDS, CANNON PINIONS
THE ALTERATION OR REPLACEMENT OF HOUR AND MINUTE WHEELS
THE REPLACEMENT OF WHEELS AND/OR PINIONS

HOW FAST OR SLOW A BALANCE OSCILLATES. THE CYCLES

ONE CAN MIC EVERY PINION, PIVOT, TINE AND JEWEL ON A 40 T0 60 YEAR OLD TIME PIECE AND DISCOVER THAT ALL IS WITHIN THE LIMITS.

OR WITNESS PARTS WORN BEYOND THE FACTORY SPECS. MAYBE NOT FOR TOTAL REPLACEMENT, BUT WORN ENOUGH TO USE THEIR TOOLS AND EXPERIENCE AS STATED ABOVE TO GET ANOTHER 30 TO 40 YEARS OUT OF A TIME PIECE. .

BUT TO REPLACE EVERY WHEEL, PIVOT AND OR PINION WOULD SIMPLY BE UNFEASIBLE DUE TO COSTS AND AVAILABILITY. .

UNLESS IT IS A VACHERON  OR PATEK OR RARE ROLEX …. THEN THE PARTS ARE WORTH MACHINING……

LIKE THESE ROCK RESTORED:

http://lsyf.com/18k-patek-tiffany-gail-borden/
A VACHERON OR PATEK W/WOLFS TEETH? SPEND THE BUCKS!

http://goldsmithworks.com/APPRAISAL/PATEK/index.htm
A PATEK-53e58 Item PATEK Philippe Ellipse Automatic 1977-1980 18kt Gold YES!

IT IS SIMPLY UNFEASIBLE IN MANY CASES… SO WE KEEP THE CASE AND FIND A MOVEMENT..

A UNIVERSAL GENEVE SOLD AT 350.00 I HAD NEAR 240 OR NEAR 300.00 IN HER TO FIX AFTER THE MAIN GAVE OUT???. HECK. IT SIMPLY IS NOT DONE.

NOW, IF YOU HAVE A WOLFS TEETH WATCH LIKE THE  VACHERON  WATCH ABOVE, WELL, YOU WILL HAVE PLENTY OF PROFIT TO COVER A COMPLETE OVERHAUL INCLUDING ALL WORN PARTS. THAT WOULD ENTAIL THE MANUFACTURING OF PARTS.

BELOW THIS ESSAY IS INFO FROM THE NATIONAL ASSOCIATION OF WATCH AND CLOCK COLLECTORS. THE ONLY ADJUSTMENTS TO A WATCH ARE FOR TIMING. YET, NONE WILL MAKE UP FOR WORN PARTS.

THAT IS UNLESS YOU ARE LIKE ROCK.. WILLING TO GO THROUGH THE EXTREMEMES KNOWING THE WORK WILL NEVER BE PAID FOR…

THIS EXPLAINS THAT NORMALLY THE ONLY ADJUSTMENTS TO A VINTAGE WATCH ARE FOR TIMING. AND, IN ALL FACT AND REALITY, DO NOT MAKE UP FOR MOST ACTUAL WEAR.

ALSO, ALL ARE FOR THE ADJUSTMENT OF TIMING. AND MOSTLY HAVE TO DO WITH NEW WATCHES AND THE TIMING AFTER SERVICING WHILE THE WATCH IS SERVICEABLE.

WHICH DOES NOT HAVE MUCH TO DO WITH MOST OF THE VINTAGE WATCHES. SUCH AS A 50 YEAR OLD BULOVA, A 58 YEAR OLD 17 JEWEL GENEVE OR A 78 YEAR OLD CHRONOGRAPH. AS WELL AS THE FACT ALL THREE ARE UNADJUSTED. THUS THEY ARE USUALLY ONLY ADJUSTABLE TO SIMPLE TIME KEEPING.

BUT IF YOU TIME WITH A MACHINE, THEN, OVER A WEEK OR TWO, USING COLD HOT TEMPS, RE-FRIDGE, HEAT LAMP AND”RAFTER TIMING”, YOU CAN PRETTY MUCH GET THEM STRAIGHT UP– THOUGH YOU PULL YOUR HAIR OUT, YOU HAVE TO SET AN ALARM AND GET UP AND DOWN 7 8 8 12 TIMES A NIGHT AND BITCH OVER AND OVER, YOU TELL AT THE WATCH, YOU RESET THE BALANCE 30, 40, 50TIMES, YOU MAY PULL THE HANDS 25 TIMES… HEN DO IT ALL OVER AGAIN UNTIL THAT WATCH BEGINS TO PURR.. NOW, KMB OR KMA

THAT IS HOW AND WHY MY WATCHES LAST AS THEY DO AND WHY I ASK WHAT I DO ASK.

PEOPLE THINK THEY CAN GET WHAT I GIVE FOR LESS. THE MARKET IS SOUR WITH CHEAP GARBAGE THAT MAKES WHAT I DO SEEM WHAT THEY DO.

 

Unadjusted

Unadjusted movements are those for which no effort has been made to adjust the watch to temperature or position. Or, no provision has been made to allow for these adjustments. Whatever variation in the timekeeping rate results from a change in temperature, or the position in which the watch is carried, exists as a result of the way that the particular watch was built. This has to be accepted as the best that watch the can do. Fortunately, just about all of the mass-produced, jeweled, American, unadjusted watches could keep time within a few minutes a day.

NONE OF THE BELOW IS EFFECTING THE WATCHES I RESTORE:.

Adjustment
Movements that are marked to be “Adjusted” may have a variety, or combination, of features. One has to read the catalog description for any given movement grade to discover just what level of adjustment is being claimed. High grade watches built after 1905-1908 may be marked with specific adjustments. This is especially true for watches intended for use in railroad time service. The balance (wheel), the wheel that spins back and forth rapidly is the device that sets the timekeeping rate of the watch. The purpose of all of the features for an adjusted watch is to keep the balance (wheel), as nearly as possible, oscillating at a consistent rate. The consistency of the rate of oscillation of the balance (wheel) thus determines the timekeeping quality of the watch.

Temperature Compensated Balance (wheel)
A balance (wheel) that is temperature compensated (also known as an expansion balance) has the rim made of two dissimilar metals. There are usually two arms (spokes) from the hub supporting the rim and there is a slot cut in the rim just past each arm. This forms two rim segments having one end supported by the arm and the far end free to move. These slots, and the two colors of metal in the rim, are identifying characteristics. As the temperature increases, lessening the power of the hairspring – the spring coiled inside of the balance (wheel) – the far ends of the rim segments deflect inward. As temperature decreases, the segment ends relax, moving outward, as the hairspring strength increases. The action is much like an inexpensive thermostat in the home. This movement of the rim segments changes the moment of inertia of the balance (wheel), compensating for the alteration in the hairspring strength.

Adjustment to Temperature
This is sometimes referred to as adjustment to heat and cold. It requires a temperature compensated balance. The balance has pairs of screws (180 degrees apart) set into the rim. These give the balance mass, which sets the basic rate at which it oscillates. One pair may be the meantime screws (which can be identified – if present – by being longer than the other screws), used to bring the rate deviation to minimum (with the regulator in its center position) after all of the other adjustments have been made. The locations of most of the pairs of screws (each pair is 180 degrees apart) on the balance (wheel) rim are chosen to provide the best match of change in moment of inertia to change in hairspring strength (there are extra pairs of holes so that the screws may be moved to the best possible positions). The object is to keep the balance (wheel) oscillating at the same rate over the specified temperature range.

Adjustment to Position
The next level is adjustment to position. This is adjustment to maintain the same rate of balance (wheel) oscillation, regardless of which of the specified positions the watch is in. There are a total of six positions. Unfortunately, the number or the positions to which the watch is adjusted isn’t specified for most watches built prior to 1905-1908. Typically, unspecified adjustment to position means adjustment to three positions, but there are a number of instances in which it means five, or sometimes 6, positions. Adjustment to three positions most likely means stem up, stem at the 3 o’clock position and stem at the 9 o’clock position.

In discussing adjustment to positions (on the NAWCC Pocket Watch Message Board, 26-Aug-06), John Runciman, quoting from the book Watch and Clock Information Please W. H. Samelius? by O. R. Hagans, posted a definition of adjustment to four positions as dial up, stem up, stem at the 3 o’clock position and stem at the 9 o’clock position. [1] It was also stated in O. R. Hagans’ book that adjustment to two positions was defined as dial up and stem up, while adjustment to one position was stem up with watch inclined 45 degrees to the rear The marking “Adjusted 2 Positions” is only occasionally seen, seemingly only on low grade Swiss watches. An indication of adjustment to one position is almost never seen.

Watches adjusted to five positions include the three positions of stem up, stem at the 3 o’clock position and stem at the 9 o’clock position, plus the dial up and dial down positions. Robert Sweet once posted several pages from the 1914 edition of the Hamilton Timekeeper which lists the five positions in order as (1) dial up, (2) dial down, (3) stem up, (4) stem at 9 o’clock and (5) stem at 3 o’clock. The 6th position is stem down at the 6 o’clock position. These positions are illustrated in a 1924 Illinois ad’. Since temperature variation is usually greater than positional variation, watches marked to be adjusted to position include adjustment to temperature. A high grade Swiss watch marked to be adjusted usually implies adjustment to all positions, wherein “all” may be 5 or 6 positions. Nevertheless, it takes a bit of experience to distinguish those movements to which this applies.

Some watches are marked ?8 Adjustments.? Depending upon the manufacturer?s specification at the moment that the watch was made, this can mean adjustment to temperature, isochronism (see below) and 6 positions. Or, it may mean adjustment to heat, cold, isochronism and 5 positions. To clear up the ambiguity, in the early 1950?s, Elgin marked its top (and only) railroad pocket watch ?9 Adjustments.?

Dave Chaplain reported the following Tariff Act of 1930 Discussion of Adjustment, on the NAWCC American Pocket Watch Message Board on September 18, 2008, 09:59 PM.

“The Tariff Act of 1930 has fees associated with watches of varying adjustments with a possibility of 9 total adjustments as follows:

“6 adjustments to position: stem up, stem left, stem right, dial up, dial down, stem down – another government publication of 1946 refers to these 6 positions and states that most “high quality watches” are adjusted to 5 positions and omitting the stem down adjustment, and “good quality watches” with 3 position adjustments most often are the stem up, dial up and dial down postions

“2 adjustments to temperature: hot and cold – the 1946 paper describes “modern monometallic solid balances” … “with hairspring made of Elinvar or some similar nickel steel alloy” as making these temperature adjustments moot

“1 adjustment to isochronism”

Another point on the subject of adjusting was posted by Don Dahlberg, pointing out that the rate to which watches were adjusted varied from grade to grade.

The marking “Adjusted” on a movement means whatever the manufacturer said it meant at the time that the watch was built. Lacking descriptive factory literature, we have no way of knowing what that means today. Unless a watch is specifically marked as to the number of positions to which it is adjusted, such as a watch that is only marked “Adjusted,” the only way to know that number (if it is adjusted to positions at all) would be to identify the grade and find the manufacturer’s description of the position adjustment for that grade. For example, the U.S. Watch Co. of Waltham’s “

The President” grade is only marked “Adjusted” (in the 9 o’clock position – right at the junction of the two damaskeened circles), yet U.S. at Waltham’s description states that it is “adjusted to heat, cold, isochronism and all positions, …” Another example is Waltham’s grade No. 35, which is only marked “Adjusted.” The description of that grade is “Adjusted to Heat and Cold, and in all Six Positions.” A lesser example is the model 92 Appleton, Tracy & Co., which simply marked “Adjusted.” A February 1902 Waltham ad describes it to be only adjusted to three positions. When the Appleton, Tracy & Co. Premier grade was introduced a few months later, it too was only marked “Adjusted,” but an October 1902 Waltham ad states that it was adjusted to five positions.

Adjustment to Isochronism
Then, there is adjustment to isochronism. This is accomplished by the design and adjustment of the hairspring – the spring coiled inside of the balance (wheel). The power output of the mainspring (the spring that is wound when winding a watch) tends to decrease as it unwinds over the course of the day. This causes the balance (wheel) to rotate through a greater rotational angle when the mainspring is just wound and a lesser angle when the mainspring needs winding. A watch adjusted to isochronism oscillates the balance (wheel) at the same rate throughout the specified length of run between windings of the mainspring, regardless of how far in each direction the balance (wheel) rotates. This length of run is typically 30 hours for earlier watches and 42 hours for post World War I watches of better quality. However, mainsprings whose power output were nearly constant over the first 20 hours after a full winding were supplied in higher grade watches starting in the late 1920’s. The need for adjustment to isochronism lessened with the application of these mainsprings.

Welcome , today is Thursday, November 23, 2017