IMG_1611.jpg (28427 bytes)

99% OF CASE FLAWS, DINGS, DENTS, IMPERFECTIONS  REMOVED
FILING AND SANDING
THEM MEASURED
THEN
POWER ROUGE CUTTING AND POLISHING
WITH 4 DIFFERENT ROUGES

IMG_1612.jpg (28741 bytes)

REMOVED MANY DINGS WITH HAMMER PIECE & MY NEW AIR OPERATED HAAMER HAND PIECEBY

IMG_1610.jpg (34740 bytes)

NOTE THE SHADED MARK? DEEPER SCRATCHES ARE SANDED AS CLOSE
AS POSSIBLE THEN POLISHED AND THEN BEADED

IMG_1607.jpg (35759 bytes)

MADE SECONDS HAND ILLUMINATION AND RED BOLDER

IMG_1623.jpg (47605 bytes)

THE LUMINOVA PLACED FOR ILLUMINATION IS PERPOUSLY RAISED SOME TO
PROVIDE LONGER ILLUMINATION OVER THE YEARS AS IT BEGINS TO LOSE
ABILTY TO GLOW. PHOSPHORYUS AND ZINC  ARE THE PRIMARY INGREDIENTS
I ALSO MADE THEM LOOK SLIGHTLY OLDER 

IMG_1602.jpg (35512 bytes)

BEZEL INSERT IS CUSTOM AND THIS ONE REQUIRED LOTS OF WORK
I PURCHASED AN AIR POWER MINI HAMMER HAND PIECE USING MY CASH AND
THAT OF MY PROFITS FROM THIS RESTORATION. IT WORKED BETTER
THAN THE FLEX SHAFT DRIVEN HAND HAMMER PIECE
EXPLAINED FURTHER DOWN

IMG_1620.jpg (46981 bytes)

FINAL CASE BACK AFTER FURTHER WORKS WITH NEW HAND PIECE

IMG_1602.jpg (35512 bytes)

THE 6105 DOES MNOT HAVE THE SPRING AND BEARING CLICKER
IT DOES NOT HAVE THE RIDGE CUTS THAT CLICK OVER THE BEARING
THAT KEEP HER "LOCKED" TO NUMERAL POSITIUON
THEY ALSO USE THE OLD SYLE WIRE HOLD RING
AND SIMPLY USE FRICTION WHEN TURNED WITH AN O RING
WHEN FIRST RECEIVED THEY -THE 6105 SERIES -- FEEL LOOSE
BUT THAT IS WD40 MISXED WITH SILCON 7 I YSE THIS TO
ASSIST IN SNAPING HER DOWN AND LUBRICATING BEZEL CHANNELS
THIS WILL EVENTUALY DISAPEAR

IMG_1616.jpg (41481 bytes)

NOTE THE CENTER SWEEPS SECOND HAND
IT SURELY GLOWS GREAT. TWICE THE AMOUNT OF LUMINOVA
AND THE RED IS AGAIN TWICE THE SIZE
ALLOWS THE HAND TO BE SEEN WHEN CROSSING THE ILLUMINATED MARKERS

IMG_1613.jpg (33911 bytes)

TIME FADE TWIST

IMG_1601.jpg (33864 bytes)

AWESOME ALL THE WAY
IS IN ITS SECOND DAY OF TESTING
I WILL NOW WEAR IT A FEW DAYS

index.html

1.JPG (10821 bytes) 2.JPG (10325 bytes)
3.JPG (13855 bytes) 4.JPG (10285 bytes)
5.JPG (10299 bytes) 7.JPG (4045 bytes)
LENS2.jpg (38476 bytes) IMG_0024.jpg (27460 bytes)
IT TAKES LOTS OF EQUIP FOR CASE WORK
JEWELERS BENCH OUTFITTED W/EVERYTHING TO RIGHT
CENTER IS WATCH WORKS W/PRESSURE TESTER MICROSCOPE
2 CPS WITH CAMERAS TO TAKE SHOTS EVERY 15 SECONDS WHEN STRIPING MOVEMENT
PLATING  BUFFING CUTTING FABRICATING
IMG_1067.jpg (29263 bytes) IMG_1066.jpg (32229 bytes)
sanding case w/mini wheel on flex shaft sanding case w/mini wheel on flex shaft
SEIKO-1.jpg (34985 bytes) images.jpg (5898 bytes)
HAMMER HAND   PLACE INSETS
AND  TO SMOOTH  OUT DINGS
BRASS/PLASTIC JEWELERS HAMMER
I USE IT TO HAMMER SMALLER DINGS
IMG_1076.jpg (6326 bytes) IMG_1077.jpg (5850 bytes)
HARD CUTTING WHITE STEEL GREY
IMG_1078.jpg (5595 bytes) IMG_1079.jpg (7783 bytes)
PRE FINISH GREEN TIO FINISH RED
IMG_1082.jpg (8636 bytes) IMG_1090.jpg (9949 bytes)
5 WHEELS ARE USED IN SEQUENCE LEFT IS CUT RIGHT SIDE IS FINISH
IMG_1085.jpg (27670 bytes) IMG_1080.jpg (9482 bytes)
NEEDS MORE WORK SEE EDGEES? NOTE EDGE ROCK MUST CUT
IMG_1094.jpg (22024 bytes)

IMG_4168.jpg (165183 bytes)

STILL NEEDS MORE WORK

6309-6105.jpg (79587 bytes) IMG_1107.jpg (20702 bytes)
IMG_1105.jpg (20109 bytes)

WHAT MAKES A SEIKO GREAT!

SILCON 7 CASE VACUMN SEALER
IMG_2497.jpg (166828 bytes) SEIKO-6309.jpg (42901 bytes)

“LOTS OF WORKS”

I DISASSEMBLE MOVEMENTS TO CLEAN

index.html